Conexpro

Úvodní stranaPowerPower cables and reductionConexpro DC power connector with cable, female, 25cm

Conexpro DC power connector with cable, female, 25cm

The DC power cable is 25 cm long, one end is fitted with a 2.1/5.5 mm DC connector (female) and the other end has shaved ends without a connector . Such a cable is often used to power various electronic devices with lower consumption, such as LED lights, cameras, security systems, DIY projects, etc. ... More information

ManufacturerConexpro

PNDC-1F

EAN0710497561402

Where to buy Ask a question

Product description Technical parameters

Product description

The DC power cable is 25 cm long, one end is fitted with a 2.1/5.5 mm DC connector (female) and the other end has shaved ends without a connector . Such a cable is often used to power various electronic devices with lower consumption, such as LED lights, cameras, security systems, DIY projects, etc.

Do you have a question or comment about this product?

Ask a question

Technical parameters

Physical characteristics

Cable typeStranded

PurposeIndoor

Length [m]0,25

Output connector [mm]5.5 / 2.1

ColorBlack

Contact form

Your name

Your company name

E-mail

Your message

Send

Another products from category (Power cables and reduction)

STB-21-55

Conexpro DC power connector socket 2.1x5.5 mm with terminal block

Recommended

DC power supply female connector (socket) with dimensions 2.1 x 5.5 mm serves to power the device, such as LED strips, adapters, voltage converters, etc., which are equipped with the same DC plug. Thanks to

L139

Conexpro separate sockets without cable, 4x 230V

Socket arrays with four sockets , white in color with the possibility of attaching your own power supply cable with a current limit of 10A and a maximum voltage of 250V. The product is equipped with a rubber

UKSCP3

Conexpro plug adapter EU schuko to UK/IRL 13A - SCP3

Cable reducer converting a Euro 2-pin plug (CEE7) to a British 3-pin plug. The plug is equipped with a hinged cap and safety screw with external access. This conversion is not permanent as the adapter can be

DC-1F8M

Conexpro DC power splitter, 8x male, 1x female

DC cable splitter with 8 outputs . The input and output connectors have dimensions of 2.1/5.5 mm. The total length of the cable is 40 cm and it can handle a maximum load of 5 A at the input and 3 A at each

PTB-21-55

Conexpro DC power connector plug 2.1x5.5 with terminal block

Recommended

DC power male connector with dimensions 2.1 x 5.5 mm is used to power devices such as LEDs tapes, adapters, voltage converters, etc., which are equipped with the same DC socket. Thanks to the terminal board,

WN217-3/07/0.3BK-4

Conexpro cable reduction from UPS (IEC C14) to 4x 230V FR socket, cable 30 cm

The network cable reducer is used for connecting 4 standard plugs (230 V AC) to the IEC C13 socket, used on the outputs of the UPS device. Thanks to high quality processing , reliability, simplicity and

DC-1F4M

Conexpro DC power splitter, 4x male, 1x female

DC cable splitter with 4 outputs . The input and output connectors have dimensions of 2.1/5.5 mm. The total length of the cable is 40 cm and it can handle a maximum load of 5 A at the input and 3 A at each

PSC-21-55

Conexpro DC power connector plug 2.1x5.5 mm with spring clamp

DC-215-100

Conexpro DC cable red/black twin copper, 2x 1.5 mm2, 16 AWG, sold by the meter

New product

The red-black duplex cable without connectors offers a reliable solution for continuous load up to 15 A and can briefly handle up to 18–20 A. It is suitable for DIY projects, connecting power supplies or

CR-SFC14M

Conexpro cable adapter from UPS (IEC C14) to socket (F) 230V, 15 cm

The network cable reducer is used for connecting a standard plug to IEC C13 sockets, used at the outputs of UPS devices. Thanks to high quality processing , reliability and safety, the product will meet the

PC-300SE

Conexpro power cable 230V AC with stripped end, 3x1 mm2, 3 m